SUMMIT 19-4 X 80 LATHE 19" SWING, 80" BETWEEN CENTERS, 4" BORE (USED)

SUMMIT 19-4 X 80 LATHE 19" SWING, 80" BETWEEN CENTERS, 4" BORE (USED)

SPECIFICATIONS:

CAPACITIES:

• SWING OVER BED 19”

• SWING OVER CROSS SLIDE 10 3/4″

• SWING OVER GAP 27”

• LENGTH OF GAP IN FRONT OF FACE PLATE 10 1/2″

• MAXIMUM WORKPIECE WEIGHT

• AT HEAD STOCK 1,000 LBS

• BETWEEN CENTERS 4,000 LBS

• BETWEEN CENTER WITH STEADY REST 5,000 LBS

• HEADSTOCK

• SPINDLE SPEEDS (#) 12

• SPINDLE SPEEDS RANGE 22-1500 RPM

• HOLE THRU SPINDLE 4 1/8”

• SPINDLE NOSE TYPE D1-8 CAMLOCK

• HEADSTOCK CENTER #5MT

• NUMBER OF BEARINGS ON SPINDLE 3

• HEADSTOCK LENGTH ON BED 21 1/4″

• TYPE OF BEARINGS ON SPINDLE 2 TAPERED ROLLER 1 STRAIGHT ROLLER

• MAIN SPINDLE ON BEARING- OUTSIDE DIA 8 1/2″

• MAIN SPINDLE ON BEARING- INSIDE DIA 5”

• OVERALL LENGTH OF SPINDLE 31 3/4″

• QUICK CHANGE GEARBOX

• THREADS PER INCH (56) 3/4 – 92

• METRIC THREADS (35) .25 – 23

• MODULE THREADS (26) .25 – 11.5

• DIAMETRAL PITCH (56) 1.5 – 184

• LONGITUDINAL FEEDS (56) .0009 – .112

• CROSS FEEDS (56) .0004 – .056

• METRIC FEEDS (56) .0235 – 2.84

• LEADSCREW DIA/RANGE 1 3/8”/4 TPI

• FEED ROD DIAMETER .863”

• LUBRICATION SYSTEM OIL BATH

• CARRIAGE & APRON

• CROSS SLIDE TRAVEL 13 3/4″

• CROSS SLIDE DEPTH OF BRIDGE 4 1/2″

• CROSS SLIDE WIDTH OF BRIDGE 8 5/8”

• COMPOUND REST WIDTH 5 1/2″

• LENGTH OF CARRIAGE BEARING ON WAYS 22”

• GRADUATION OF APRON HANDWHEEL .01

• TRAVEL OF CARRIAGE PER REV OF HANDWHEEL 1”

• GRADUATION OF CARRIAGE CROSS SLIDE HANDWHEEL .002”

• TRAVEL OF CROSS SLIDE PER REV OF HANDWHEEL .25”

• HEIGHT FROM TOP OF COMPOUND TO CENTERLINE OF

• LATHE 2 3/8”

• MAXIMUM TOOL HOLDER SIZE NO 6

• TYPE OF LUBRICATION SYSTEM RECIPROCATING PUMP

• TAILSTOCK

• TRAVEL OF SPINDLE BARREL 8 1/2″

• DIAMETER OF SPINDLE BARREL 3”

• TAPER OF CENTER #5MT

• TAILSTOCK BODY LENGTH ON BED 13 3/8”

• LENGTH OF BARREL GRADUATIONS ON SPINDLE 8”

• TYPE OF CLAMPING ON BED BOLTS/LEVER CLAMPS

• TYPE OF LUBRICATION SYSTEM RESERVOIR

• BED

• WIDTH OF BED 13 3/4″

• DEPTH OF BED 16 1/2″

• HARDNESS OF BED (ROCKWELL C) 44-52

DRIVE MOTORS

• TYPE OF INPUT DRIVE VEE BELT

• NUMBER OF VEE BELTS 3

• MAIN DRIVE MOTOR 7.5 HP

• COOLANT PUMP MOTOR 1/4 HP

• MISCELLANEOUS

• STEADY REST MIN TO MAC CAPACITY 19/32”-7”

• FOLLOW REST MIN TO MAX CAPACITY 19/32”-7”

• FACE PLATE DIAMETER 23 1/2″

• COOLANT PUMP MOTOR 1/4″ HP

SHIPPING DATA

• OVERALL WIDTH 46”

• OVERALL HEIGHT 60”

• OVERALL LENGTH/WEIGHT FOR 80” CENTERS 144”/6,800 LBS

STANDARD FEATURES:

• HARDENED & GROUND INSERTED WAYS

• 15 3/8” GAP ALLOWING 27” SWING

• INCH/METRIC THREADS BY SINGLE SHIFT LEVER

• EXTENDED CROSS SLIDE WITH T-SLOTS

• CONVENIENTLY LOCATED CONTROLS

• GEARED PUMP FORCED LUBRICATION

• PRECISE THREE (3) BEARING SPINDLE

• CUTS MOST AMERICAN AND METRIC THREADS WITHOUT CHANGING GEARS